Nossa especialidade

Imprimir

Laminadora Foliant Mercury 530SF (frente e verso)

The FOLIANT Mercury 530 SF is a very compact industrial laminating machine, constructed for a heavy duty digital and offset outputs lamination, with an integrated suction feeder Heidelberg and a high speed bump separator. Several options are available for the Mercury machine – a module for the double sided lamination, a module with the embossed laminating roller, pallet stacker, etc. Due to its high pressure system, format and performance the machine is suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B2+ lamination too. The machine maximum speed is up to 20 m/min., while performance is 1650 sheets per hour of B2 portrait (white paper 200 gsm). 

 

Feeder

The FOLIANT Mercury 530 SF is equipped with a rising pile back separation stream feeder and with a suction feed head Heidelberg. It is driven by an Omron servo motor and controlled by a machine central PLC. The Becker vacuum pump is used for sheets back airing. The overlaps are electronically controlled, in an „in-run“ automatic mode, from the touch screen. The accuracy is +/- 2 mm under-lap (in a constant speed). The feeder is fitted with a lifting plate and its capacity is a 54 cm pile of paper.

Laminator

The FOLIANT Mercury 530 SF laminator maximum sheet size is 53 x 74 cm. The minimum sheet size is 30 x 20 cm (A4).The FOLIANT Mercury 530 SF machine is a single sided thermal industrial laminator, laminating the 115 – 500 gsm paper,.

The laminating unit is equipped with an adjustable twin decurl unit:

  • With a decurl blade for offset printed sheets decurling
  • With a decurl roller for digital printed sheets decurling (to prevent the scratches on sheets printed on both sides by digital print with sensitive inks).

The roll of a film is mounted on a quick-changed shaft with a film tension control breaker. The shaft capacity is up to 3000 m of the 24 - 31 microns film. The film holder unit is equipped with a trim slitter and a perforating wheel. 
The laminating process is made between two laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller. The laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor. The warming up time is shorter than 10 minutes. The pressure is pneumatically adjustable, with an extra independent control knob for each roller edge.

The machine is fitted with OMRON Programmable Logic Controllers, which control all machines’ functions. The used PLC system includes many automation items for an easy control of the machine and a reliable lamination. The whole machine is controlled by an interactive easy understandable icon touch screen panel – no language version is needed. 

Separator

The integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers. The process is controlled from the machine PLC unit. The separated sheets are delivered into a vibrating jogger (optional) or a pallet stacker (optional).

Laminating films

The machine laminates the BOPP films (23 – 42 microns) and Nylon films (max. 35 microns). The PET films (max. 35 microns) can be laminated with the optional module only.

Options

  • Jogger 530 (Optional)*
  • It is an adjustable vibrating reception unit for the laminated sheets stocking. Its capacity is limited up to a 10 cm pile of sheets.
  • Integrated Pallet Stacker 530 (Optional)*

It is a device equipped with a lifting plate with a pallet, electronically controlled from the machine PLC, which loads the laminated sheets into a high pile. Its capacity is 70 cm pile of sheets.Its advatage is in very compact dimensions and fully electronic control (up/down).

Pallet Stacker 530 - pneumatic varsion (Optional)*

It is a device equipped with a pallet trolley, pneumatically controlled from the machine PLC, which loads the laminated sheets into a high pile. Its capacity is 65 cm pile of sheets.

  • Double Sided Laminating Module (Optional)

It is module for one pass double sided sheets lamination.

  • PET Lamination Module (Optional)

It is a module integrated inside the separator for the PET films (max. 30 microns) processing.

  • Film Loader / Manipulator (Optional)

It is an electric lift with a film core adaptor for loading heavy rolls of film (max. capacity 125 kg). The device is not integrated with the machine. It is only connected with the machine electric circuits

 

*Important – the machine must be operated either with a Pallet Stacker or with a Jogger.

f mercury 530sf_y_2mercury_double_sidedmercury_stackermercury_feedingheadJogger_530Palette-Stacker

 

Principais Características

Max. velocidade

20 m / min.

Alimentação

Automática

Sistema de Alimentação

Sucção com cabeça da Heidelberg

Capacidade bandeja de alimentação

54 cm

Controlador de voltas

Controlador CLP

Precião

+ / - 2 mm

Separação

Automatic, Bump Rollers

Gramatura

115 - 500 g/cm

Pressão dos rolos

Pneumático

Compressor 150l/min 6-8 bar

Incluso

Dimensão Mínima do Papel

20 x 30 cm

Dimensão Máxima do Papel

53 x 74 cm

Max. Performance

1650 B2 / hour

Tempo de aquecimento

8 min.

Controle de temperatura

80 - 140°C

Tensão de Energia

3 ph., 400V AC, 50-60 Hz

Potência

6000 W

Ocupação de área  incl. Jogger

120 x 270 cm

Peso

500 kg

Modulo para processador de filmes PET

Opcional

Modulo de laminação do verso

Opcional

Jogger 530

Opcional

Pallet Stacker (Electric) 70 cm

Opcional

Pallet Stacker (Pneumatic) 70 cm

Opcional

Film Loader (Electric)

Optional

 

 Quer mais informações?

Exemplo: www.diginove.com.br
Apenas números.