A Foliant Mercury 400 SF é um máquina de laminação industrial muito compacta, construída para mercado digital e offset entregando resultados perfeitos de laminação, com um alimentador de sucção integrado da Heidelberg e separador na saida de alta velocidade. Existem vários opcionais disponíveis para a máquina Mercury - por exemplo um módulo para a laminação de dupla face, um módulo com o rolo de laminação em relevo, Palete Empilhador, etc.

Due to its high pressure system, format and performance the machine is suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B3+ lamination too. The machine maximum speed is up to 20 m/min., while performance is 2400 sheets per hour of B3 portrait (white paper 200 gsm).

 Feeder

The FOLIANT Mercury 400 SF is equipped with a rising pile back separation stream feeder and with a suction feed head Heidelberg. It is driven by an Omron servo motor and controlled by a machine central PLC. The Becker vacuum pump is used for sheets back airing. The overlaps are electronically controlled, in an „in-run“ automatic mode, from the touch screen. The accuracy is +/- 2 mm under-lap (in a constant speed). The feeder is fitted with a lifting plate and its capacity is a 54 cm pile of paper.

Laminator


foliant mercury 400 sf yThe FOLIANT Mercury 400 SF laminator maximum sheet size is 38 x 70 cm (for example the maximum outputs from Xerox iGen4 are 38 x 66 cm). The minimum sheet size is 30 x 20 cm (A4).The FOLIANT Mercury 400 SF machine is a single sided thermal industrial laminator, laminating the 115 – 500 gsm paper,.

The laminating unit is equipped with an adjustable twin decurl unit:

  • With a decurl blade for offset printed sheets decurling
  • With a decurl roller for digital printed sheets decurling (to prevent the scratches on sheets printed on both sides by digital print with sensitive inks).

The roll of a film is mounted on a quick-changed shaft with a film tension control breaker. The shaft capacity is up to 3000 m of the 24 - 31 microns film. The film holder unit is equipped with a trim slitter and a perforating wheel.
The laminating process is made between two laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller. The laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor. The warming up time is shorter than 10 minutes. The pressure is pneumatically adjustable, with an extra independent control knob for each roller edge.

The machine is fitted with OMRON Programmable Logic Controllers, which control all machines’ functions. The used PLC system includes many automation items for an easy control of the machine and a reliable lamination. The whole machine is controlled by an interactive easy understandable icon touch screen panel – no language version is needed.

Separator

The integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers. The process is controlled from the machine PLC unit. The separated sheets are delivered into a vibrating jogger (optional) or a pallet stacker (optional).

Laminating films

The machine laminates the BOPP films (23 – 42 microns) and Nylon films (max. 35 microns). The PET films (max. 35 microns) can be laminated with the optional module only.

Options

  • Jogger 400 (Optional)*

It is an adjustable vibrating reception unit for the laminated sheets stocking. Its capacity is limited up to a 10 cm pile of sheets.

  • Pallet Stacker 400 (Optional)*

It is a device equipped with a lifting plate with a pallet, electronically controlled from the machine PLC, which loads the laminated sheets into a high pile. Its capacity is 70 cm pile of sheets

  • Double Sided Laminating Module (Optional)

It is module for one pass double sided sheets lamination.

  • PET Lamination Module (Optional)

It is a module integrated inside the separator for the PET films (max. 30 microns) processing.

  • Film Loader / Manipulator (Optional)

It is an electric lift with a film core adaptor for loading heavy rolls of film (max. capacity 125 kg). The device is not integrated with the machine. It is only connected with the machine electric circuits.

 

*Important – the machine must be operated either with a Pallet Stacker or with a Jogger

foliant mercury 400 sf double_y foliant mercury 400 sf double_pallet_y mercury_feedinghead Jogger-400 mercury_double_sided

 

Caracteristicas:  
Máxima velocidade 20 m / min.

Alimentação

Automática
Sistema de Alimentação Sucção com cabeça da Heidelberg
Capacidade de Carga do alimentador 54 cm
Controlador de voltas Automatico, controlador CLP
Precisão do Controlador + / - 2 mm
Separação na saida Automatica por rolos
Gramatura do papel 115 - 500g
Sistema de pressão dos rolos Pneumático
Compressor 150L/min Incluso
Dimensão Mínima do Papel 20 x 30 cm
Dimensão Máxima do Papel 38 x 70 cm
Max. Performance 2400 B3 / hora
Tempo de aquecimento 8 min.
Controle de temperatura 80 - 140°C
Tensão de energia 400V AC, 50-60 Hz
Potência 5000 W
Piso ocupado (LxC) incl. Jogger 105 x 230 cm
Peso 430 kg
Modulo para processamento de filme PET Opcional
Double Sided Laminating Module Opcional
Jogger 400 Opcional
Pallet Stacker 400 Opcional
Pallet Stacker Capacity 70 cm
Carregador de filme (Elétrico) Opcional
0
0
0
s2sdefault

Quer mais informações?

 


Ligue para Diginove e tire suas dúvidas