(11)98898-0741 WhatsApp

The FOLIANT Taurus 530 SF is a very compact and fast industrial laminating machine, constructed for a heavy duty with an integrated suction feeder and a high speed bump separator and an optional pallet feeder and pallet stacker.  Due to its format and performance the machine is suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B2+ lamination too. The machine maximum speed is up to 35 m/min., while performance is 2500 sheets per hour of B2 portrait (white paper 200 gsm).



The FOLIANT Taurus 530 SF is equipped with a rising pile back separation stream feeder and with a suction feed head. It is driven by an Omron servo motor and controlled by a machine central PLC. The Becker vacuum pump is used for sheets back airing. The overlaps are electronically controlled, in an „in-run“ automatic mode, from the touch screen. The accuracy is +/- 2 mm under-lap (in a constant speed). The standard feeder is fitted with a lifting plate and its capacity is a 65 cm pile of paper.


The FOLIANT Taurus 530 SF laminator maximum sheet size is 53 x 74 cm. The minimum sheet size is 30 x 25 cm (A4).The FOLIANT Taurus 530 SF machine is a single sided thermal industrial laminator, laminating the 115 – 500 gsm paper, with an unique „U“ cross bar for the thin sheets flat and safety high pressure lamination, mounted in the front of the main laminating rollers.

The laminating unit is equipped with an adjustable twin decurl unit:

  • With a decurl blade for offset printed sheets decurling
  • With a decurl roller for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks).

The roll of a film is mounted on a quick-changed shaft with a film tension control breaker and with a precise film positioning nut (its range is +/- 10 mm). The shaft capacity is up to 3000 m of the 24 - 31 microns film. The film holder unit is equipped with a trim slitter and a perforating wheel.

The laminating process is made between two laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller. The laminating roller is heated with a dry electric system inside the roller, with a sensitive in-roll temperature sensor. The warming up time is shorter than 10 minutes. The pressure is pneumatically adjustable, with an extra independent control knob for each roller edge.

The machine is fitted with OMRON Programmable Logic Controllers, which control all machines’ functions. The used PLC system includes many automation items for an easy control of the machine and a reliable lamination. The whole machine is controlled by an interactive easy understandable icon touch screen panel – no language version is needed.


The integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers. The process is controlled from the machine PLC unit. The separated sheets are delivered into a vibrating jogger (optional) or a pallet stacker (optional).

Lamination Films

The machine laminates the BOPP films (23 – 42 microns) and Nylon films (max. 35 microns). The PET films (max. 35 microns) can be laminated with the optional module only.


  • PET Module (optional)

The machine laminates the BOPP films (23 – 42 microns) and Nylon films (max. 35 microns). The PET films (max. 35 microns) can be laminated with the optional module only.

  • Pallet Feeder (optional)

It is fitted with a pallet holder and an adaptor for a full pallet of paper. Its capacity is 65 cm paper pile. The pallet can be manipulated from the front and it requires another space for the manipulation.

  • Pallet Stacker (optional)

It is a device equipped with a pallet trolley, pneumatically controlled from the machine PLC, which loads the laminated sheets into a high pile. Its capacity is 65 cm pile of sheets.

  • Jogger 530 (optional)

It is an adjustable vibrating reception unit for the laminated sheets stocking. Its capacity is limited up to a 10 cm pile of sheets.

  • Film Loader/Manipulator (optional)

It is an electric lift with a film core adaptor for loading heavy rolls of film (max. capacity 125 kg). The device is not integrated with the machine. It is only connected with the machine ̀s electric circuits.

*Important – the machine must be operated either with a Pallet Stacker or with a Jogger.

Palette_Feeder  Jogger_530 Paletový vykladačFilme-external-Carregando-Crane


Principais Caracteristicas

Max. velocidade

35 m / min



Sistema de Alimentação

Cabeça de Sucção

Capacidade do alimentador

65 cm

Controlador de voltas

Controlador CLP


+ / - 2 mm


Automático, roletes de impacto


115 - 500 g/m2

Sistema do rolo de pressão


Compressor 150 l / min, 6 - 8 bar


Dimensão Mínima do Papel

30 x 25 cm

Dimensão Máxima do Papel

53 x 74 cm

Max. performance

2500 B2 / h

Controle de temperatura

80 - 140°C

Tempo de aquecimento

8 min

Tensão de energia

3 ph., 400 V AC, 50-60 Hz


7000 W

Área de ocupação (w x l)

114 x 260 cm


530 kg

Modulo PET


Jogger 530


Pallet Stacker


Pallet Stacker Capacity

65 cm

Pallet Feeder


Pallet Feeder's Capacity

65 cm

Film Loader (Electric)


Quer mais informações?

Informações de Contato
Tel. (+55 11) 2365-6169

Ligue para Diginove e tire suas dúvidas